Australia
Characteristics of Australia awnings:
- ideal for bigger terraces or commercial objects;
- enhanced bendings for a better stretch of the fabric;
- an aluminium profile, along the sides of the product enables a free choice of where to install the awning. There are special holders for the profiles;
- There is a central tube holder for wider awnings. It helps to reduce fabric curvatures.
Foldaway parts | tube, bending, fabric and remote control. |
Ways of instalment | On walls, ceilings or roof structure – rafter. |
Cassette | No |
Control |
Manual or remote control |
Manual control | Possible length of handle: 1,5 m; 1,8 m; 2,2 m. |
Remote control | Engine, engine with opening possibility in case of emergency, remote control, wind sensor or wind and sun sensor. |
Tube | Diameter – 70 mm or 80 mm |
Bending | Can be folded, aluminium, with springs and resistant chains. |
Bendings, that slide past each other | Possible. With bendings that slide past each other, the width of the awning: projection – 0.4 m |
Additional overhang | No |
Colour of the awning construction | Powder inking: white, sand, brown, graphite, silver. |
Wave |
Standard height 21 cm (± 0,5 cm), 3 ways, max height 40 cm. |
Angle of incline | 5°~60° |
Projection | 1,6 m; 2,1 m; 2,6 m; 3,1 m; 3,6 m. |
Max projection | 3,6 m. |
Max width | 7 m. |
Min width | Projection + 0,35 m. |
Guarantee | 24 months |